ISO Tolerance specification in reverse engineering

Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11531/23237

Registro completo de metadatos

Campo DC	Valor	Lengua/Idioma
dc.contributor.author	Sáenz Nuño, María Ana	es-ES
dc.contributor.author	Lorente Pedreille, Raquel María	es-ES
dc.date.accessioned	2017-10-12T03:06:49Z	-
dc.date.available	2017-10-12T03:06:49Z	-
dc.identifier.uri	http://hdl.handle.net/11531/23237	-
dc.description.abstract		es-ES
dc.description.abstract	Since the publication of the ISO 14253-1 in 2013 [1]. we have worked in the development of a reliable measurement procedure in reverse engineering. In the beginning, it may seem to be easy to measure a part and to get the estimated value of the sizes and its uncertainties, but several times the dimensional tolerance is not considered, and geometrical tolerances are passed over (unattended). We propose here a tested procedure, simple and practical for the Industry, in accordance with the requirements of the ISO 14253-1:2013 for fully define the sizes and tolerances of any workpiece in reverse engineering.	en-GB
dc.format.mimetype	application/pdf	es_ES
dc.language.iso	en-GB	es_ES
dc.title	ISO Tolerance specification in reverse engineering	es_ES
dc.type	info:eu-repo/semantics/workingPaper	es_ES
dc.description.version	info:eu-repo/semantics/draft	es_ES
dc.rights.holder		es_ES
dc.rights.accessRights	info:eu-repo/semantics/openAccess	es_ES
dc.keywords		es-ES
dc.keywords	reverse engineeringtolerance assignmentfunctional characteristic	en-GB
Aparece en las colecciones:	Documentos de Trabajo

Ficheros en este ítem:

Fichero	Descripción	Tamaño	Formato
IIT-17-160A.pdf		653,55 kB	Adobe PDF	Visualizar/Abrir