Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11531/51598
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorFuertes Kronberg, Carloses-ES
dc.contributor.authorNúñez Riva, Santiagoes-ES
dc.contributor.otherUniversidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI)es_ES
dc.date.accessioned2020-10-07T11:15:16Z-
dc.date.available2020-10-07T11:15:16Z-
dc.date.issued2021es_ES
dc.identifier.urihttp://hdl.handle.net/11531/51598-
dc.descriptionMáster Universitario en Ingeniería Industriales_ES
dc.description.abstractEl objeto de este proyecto es la ampliación de unas cuadras en una explotación ganadera en Asturias, estableciendo las condiciones técnicas y legales a las que deberán ajustarse las estructuras para poder llevar a cabo este proyecto. La motivación de este es la necesidad de aumentar el espacio disponible para estabulación de caballos debido al aumento de la producción en este año y el siguiente. En este proyecto se calculará la estructura de la parte a ampliar. Se dimensionará el circuito eléctrico correspondiente y se estudiará la posibilidad de instalar placas fotovoltaicas. Para todo ello se deberá tener en cuenta que la estructura tendrá tres espacios de diferente utilidad. En la planta inferior es donde se encontrarán las cuadras y las dependencias correspondientes a los cuidados de los caballos, como: guadarnés, piensera y duchas. Sobre esta misma planta, en la planta superior el espacio estará dividido en dos utilidades una de almacén de forraje y paja para la cuadra y una parte habitable con los cuartos unipersonales y una sala de estar en la que también estará la cocina.es-ES
dc.description.abstractThe purpose of this project is the expansion of a few blocks in a cattle farm in Asturias, establishing the technical and legal conditions to which the structures must comply in order to carry out this project. The motivation for this is the need to increase the space available for stabling horses due to the increase in production this year and the next. In this project the structure of the part to be enlarged will be calculated. The corresponding electrical circuit will be dimensioned and the possibility of installing photovoltaic panels will be studied. For all this, it must be taken into account that the structure will have three spaces of different utility. On the lower floor is where the stables and the rooms corresponding to the care of the horses will be found, such as: guadarnés, thinker and showers. On this same floor, on the upper floor, the space will be divided into two utilities, one for the forage and straw warehouse for the stable and a habitable part with the one-person rooms and a living room where the kitchen will also be.en-GB
dc.format.mimetypeapplication/pdfes_ES
dc.language.isoen-GBes_ES
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United Stateses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/es_ES
dc.subject.otherH62-mecanica (MII-M)es_ES
dc.titleCálculo y diseño de una nave de cuadras de dos plantas con viviendaes_ES
dc.typeinfo:eu-repo/semantics/masterThesises_ES
dc.rights.accessRightsinfo:eu-repo/semantics/closedAccesses_ES
dc.keywordsPortico acero celosia cuadraes-ES
dc.keywordsPortico steel lattice stableen-GB
Aparece en las colecciones: H62-Trabajos Fin de Máster

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TFM- Nunez Riva, Santiago.pdfTrabajo Fin de Máster3,7 MBAdobe PDFVista previa
Visualizar/Abrir
Anexo I Nunez Riva, Santiago.pdfAutorización131 kBAdobe PDFVista previa
Visualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.