Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11531/95090
Título : Evaluación de alternativas de Inteligencia Artificial generativa orientada al DibujoTécnico
Autor : Porras Galán, José
Díez Sanz, Carlos
Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI)
Fecha de publicación : 2025
Resumen : Búsqueda, clasificación y análisis de las diferentes herramientas de Inteligencia Artificial, disponibles en la actualidad, con orientación al CAD (Computer Assisted Design) de forma directa o indirecta. Para comenzar, se realizó una búsqueda y selección de aquellas herramientas útiles para el proceso, que debía ser paramétrico, mediante una serie de pruebas sencillas, encontrándose tanto servicios generalizados de Inteligencia Artificial (por ejemplo ChatGPT) como herramientas orientadas solamente al CAD mediante Inteligencia Artificial (por ejemplo Text-to-CAD). Posteriormente, se realizaron distintos ensayos para ver características de interés que pueden ser útiles a la hora de emplear estos servicios, al estar sometidas a tareas relacionadas con el CAD, además de organizar las tareas realizadas mediante la siguiente clasificación: texto a CAD, modelo CAD a plano técnico e imagen (modelo o plano) a CAD. Además, se analizaron distintas alternativas para obtener las mejores respuestas en el menor tiempo posible, optimizando el proceso constantemente. A la vez que se realizaban los distintos ensayos, también se descubrieron ciertas características de las herramientas empleadas, fuera del campo del CAD, que son interesantes de indicar. Para terminar, se realizaron comparaciones de precisión, calidad, eficiencia, manejo, uso general y limitaciones de los distintos servicios; comentándose además que futuros desarrollos pueden tener lugar en el campo de la Inteligencia Artificial orientada al CAD.
Search, classification and analysis of the different Artificial Intelligence tools currently available, with a direct or indirect orientation towards CAD (Computer Assisted Design). To begin with, a search and selection of those tools useful for the process, which was to be parametric, was carried out by means of a series of simple tests, finding both generalised Artificial Intelligence services (such as ChatGPT) and tools oriented solely towards CAD using Artificial Intelligence (such as Text-to-CAD). Subsequently, different tests were carried out to see characteristics of interest that may be useful when using these services, as they are subject to CAD-related tasks, in addition to organising the tasks carried out by means of the following classification: text to CAD, CAD model to technical drawing and image (model or drawing) to CAD. In addition, different alternatives were analysed in order to obtain the best answers in the shortest possible time, constantly optimising the process. At the same time as the different tests were carried out, certain characteristics of the tools used, outside the CAD field, were also discovered that are interesting to point out. Finally, comparisons of accuracy, quality, efficiency, handling, general use and limitations of the different services were made, and it was discussed what future developments may take place in the field of CAD-oriented Artificial Intelligence.
Descripción : Grado en Ingeniería en Tecnologías Industriales
URI : http://hdl.handle.net/11531/95090
Aparece en las colecciones: TFG, TFM (temporales)

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TFG_CDS_Borrador_DiezSanzCarlos.pdfTrabajo Fin de Grado13,95 MBAdobe PDFVisualizar/Abrir
AnexoI_Borrador.pdfAutorización50,57 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.