Mostrar el registro sencillo del ítem
Estudio de una protección deportiva
dc.contributor.advisor | García de Garmendia, Antonio | es-ES |
dc.contributor.author | Gutiérrez Riopérez, Jorge | es-ES |
dc.contributor.other | Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI) | es_ES |
dc.date.accessioned | 2018-09-05T13:41:33Z | |
dc.date.available | 2018-09-05T13:41:33Z | |
dc.date.issued | 2019 | es_ES |
dc.identifier.uri | http://hdl.handle.net/11531/30603 | |
dc.description | Máster Universitario en Ingeniería Industrial | es_ES |
dc.description.abstract | El Proyecto tiene como motivación mejorar el diseño técnico de una protección deportiva, tanto desde el punto de vista de la seguridad del jugador como de su ergonomía. El proyecto es un estudio que engloba ciencias tan variadas como la transmisión de calor, la estadística, ergonomía o la selección de materiales y las pone a disposición del diseño deportivo. Concretamente, se va a desarrollar una protección de pecho y hombro para el deporte americano, Lacrosse. Para realizar el diseño es necesario aplicar conocer las características mecánicas que la armadura requiere y de los materiales que se van a usar. Se realiza una introducción al deporte, se comenta la gravedad de las lesiones y su frecuencia. En este caso, las lesiones que se intentan evitar son las de tronco superior y afectan a la articulación del hombro o al esternón. Durante el tercer capítulo se usan las necesidades establecidas en el anterior capítulo y se empieza hablar del diseño de una prenda deportiva y la selección de sus materiales. Finalmente se busca la aplicación de nuevas propuestas y se define como aumentar la vida útil del producto mediante distintos enfoques. El primer enfoque es mediante la sustitución de piezas que sufren un desgaste acelerado frente al resto de la protección. Será solucionado mediante la implementación de velcros como pieza única. El segundo enfoque para aumentar la vida útil es facilitar la ergonomía en el movimiento y que la protección se ajuste correctamente al jugador. En el tercer capítulo del diseño el proyecto se centra en la transmisión de calor, transpiración y ergonomía térmica. El último capítulo que está enfocado al diseño atañe a la selección de materiales mediante el software CES Edu Pack. Se seleccionan cinco materiales distintos para la protección y sus distintas aplicaciones. | es-ES |
dc.description.abstract | The project aims to improve the technical design of a sports protection, both from the point of view of player safety and ergonomics. The project is a study that encompasses sciences as varied as heat transmission, statistics, ergonomics or the selection of materials and makes them available to sports design. Specifically, it will develop a chest and shoulder protection for the American sport, Lacrosse. To carry out the design, it is necessary to apply the mechanical characteristics that the armor requires and the materials that will be used. An introduction to the sport is made, the severity of the injuries and their frequency are commented. During the third chapter, the needs established in the previous chapter are used and we start talking about the design of a sports garment and the selection of its materials. Finally, the application of new proposals is sought and defined as increasing the useful life of the product through different approaches. The first approach is to replace parts which suffer accelerated wear against the rest of the protection. It will be solved by implementing Velcros as a single piece. The second approach to increase his life is to facilitate the ergonomics in the movement and ensure that the protection is adjusted correctly to the player. In the third chapter of the project´s design focuses on heat transmission, transpiration, and thermal ergonomics. The last chapter focuses on design concerns the selection of materials through the CES Edu Pack software. Five different materials are selected for protection and their different applications. The properties of the materials are calculated according to the needs of the garment and the game. Finally, the implementation of design in manufacturing is established as future research paths, carrying out the design of other similar protections or the market strategy of the new product. | en-GB |
dc.format.mimetype | application/pdf | es_ES |
dc.language.iso | es-ES | es_ES |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 United States | es_ES |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/us/ | es_ES |
dc.subject.other | MII-M (H62-mecanica) | es_ES |
dc.title | Estudio de una protección deportiva | es_ES |
dc.type | info:eu-repo/semantics/masterThesis | es_ES |
dc.rights.accessRights | info:eu-repo/semantics/closedAccess | es_ES |
dc.keywords | Lacrosse, deporte, diseño, ergonomía | es-ES |
dc.keywords | lacrosse, design, sport, ergonomics | en-GB |