Show simple item record

dc.contributor.authorSáenz Nuño, María Anaes-ES
dc.contributor.authorLorente Pedreille, Raqueles-ES
dc.date.accessioned2018-09-06T02:49:24Z
dc.date.available2018-09-06T02:49:24Z
dc.date.issued28/06/2017es_ES
dc.identifier.urihttp://hdl.handle.net/11531/30634
dc.descriptionCapítulos en libroses_ES
dc.description.abstractes-ES
dc.description.abstractSince the publication of the ISO 14253-1 in 2013 [1]. we have worked in the development of a reliable measurement procedure in reverse engineering. In the beginning, it may seem to be easy to measure a part and to get the estimated value of the sizes and its uncertainties, but several times the dimensional tolerance is not considered, and geometrical tolerances are passed over (unattended). We propose here a tested procedure, simple and practical for the Industry, in accordance with the requirements of the ISO 14253-1:2013 for fully define the sizes and tolerances of any workpiece in reverse engineering.en-GB
dc.format.mimetypeapplication/pdfes_ES
dc.language.isoen-GBes_ES
dc.publisherUniversidade de Vigo (Vigo, España)es_ES
dc.sourceLibro: 7th Manufacturing Engineering Society International Conference - MESIC 2017, Página inicial: 472-479, Página final:es_ES
dc.subject.otherInstituto de Investigación Tecnológica (IIT)es_ES
dc.titleISO Tolerance specification in reverse engineeringes_ES
dc.typeinfo:eu-repo/semantics/bookPartes_ES
dc.description.versioninfo:eu-repo/semantics/publishedVersiones_ES
dc.rights.holderes_ES
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES
dc.keywordses-ES
dc.keywordsreverse engineeringtolerance assignmentfunctional characteristicen-GB


Files in this item

Thumbnail

This item appears in the following Collection(s)

  • Artículos
    Artículos de revista, capítulos de libro y contribuciones en congresos publicadas.

Show simple item record