Mostrar el registro sencillo del ítem

dc.contributor.advisorGiannetti, Romanoes-ES
dc.contributor.authorGuidi , Simonees-ES
dc.contributor.otherUniversidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI)es_ES
dc.date.accessioned2018-12-16T18:42:26Z
dc.date.available2018-12-16T18:42:26Z
dc.date.issued2019es_ES
dc.identifier.urihttp://hdl.handle.net/11531/33892es_ES
dc.descriptionIntercambio de la Escuela Técnica Superior de Ingeniería (ICAI)es_ES
dc.description.abstractEn este trabajo construí un dispositivo basado en el principio de la bomba Howland capaz de conducir por muchos tipos de cargas actuales; Caracterizo este dispositivo en términos de ruido y distorsión: En la prueba de distorsión, utilicé Matlab para crear un script capaz de determinar el índice de distorsión armónica total de la medición para comparar las mediciones de entrada y salida y comprender la distorsión introducida por nuestro dispositivo; En la prueba de ruido utilizamos una cámara anecoica porque es el instrumento más útil que puede reducir el ruido externo y permitirnos comprender qué parte del ruido sale directamente de nuestro dispositivo. Finalmente, utilicé el dispositivo para estudiar los comportamientos no lineales en supercapacitores cuando se cobran hasta su valor nominal; en esta condición descubrimos que los supercapacitores tienen un comportamiento no lineal similar a una curva de histéresis. Luego caracterizamos el comportamiento en relación con un paso de corriente y descubrimos que podríamos modelar este comportamiento con una resistencia constante con un valor de 22 mΩ. Finalmente, evaluamos el comportamiento de estos componentes más allá de sus límites para comprender qué tipo de problemas surgen. Descubrimos que ocurren muchos daños internos y que tenemos una saturación del supercapacitador en términos de voltaje.es-ES
dc.description.abstractIn this work I built a device base on the principle of the Howland pump able to drive by current many types of loads; I characterize this device in terms of noise and distortion: In the distortion test I used Matlab to create a script able to determine the Total Armonic distortion Index of the measurement so to compare the input and output measurements and to understand the distortion introduced by our device; In the noise test we used an anechoic chamber because is the most useful instrument able to reduce the external noise and to allow us to understand which part of the noise come out directly from our device. Finally I used the device to study the nonlinear behaviors in supercapacitors when they are charged up to their nominal value; in this condition we found out that supercapacitors have a nonlinear behaviour similar to an hysteresis curve. We then characterized the behaviour relative to a step current and we discovered that we could model this behaviour with a constant resistor with a 22 mΩ value. At last we evaluated the behavior of this components beyond their limits to understand which type of problems come out. We found out that many internal damages occur and that we have a saturation of the supercapacitor in terms of voltage.en-GB
dc.format.mimetypeapplication/pdfes_ES
dc.language.isoen-GBes_ES
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United Stateses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/es_ES
dc.titleConstruction of set-up for the evaluation of non-linear behavior of supercapacitorses_ES
dc.typeinfo:eu-repo/semantics/masterThesises_ES
dc.rights.accessRightsinfo:eu-repo/semantics/closedAccesses_ES
dc.keywordsSupercondensadores, bomba Howland, prueba de ruido y distorsión, cámara anecoica, histéresis.es-ES
dc.keywordssupercapacitors, howland pump, noise and distortion test, anechoic chamber, hysteresisen-GB


Ficheros en el ítem

Thumbnail
Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem

Attribution-NonCommercial-NoDerivs 3.0 United States
Excepto si se señala otra cosa, la licencia del ítem se describe como Attribution-NonCommercial-NoDerivs 3.0 United States