Power conversion systems based on Brayton cycles for fusion reactors
Fecha
01/10/2011Autor
Estado
info:eu-repo/semantics/publishedVersionMetadatos
Mostrar el registro completo del ítemResumen
. This paper investigates Brayton power cycles for fusion reactors. Two working fluids have been explored:
helium in classical configurations and CO2 in recompression layouts (Feher cycle). Typical recuperator
arrangements in both cycles have been strongly constrained by low temperature of some of the energy
thermal sources from the reactor. This limitation has been overcome in two ways: with a combined
architecture and with dual cycles. Combined architecture couples the Brayton cycle with a Rankine one
capable of taking advantage of the thermal energy content of the working fluid after exiting the turbine
stage (iso-butane and steam fitted best the conditions of the He and CO2 cycles, respectively). Dual
cycles set a specific Rankine cycle to exploit the lowest quality thermal energy source, allowing usual
recuperator arrangements in the Brayton cycle. The results of the analyses indicate that dual cycles could
reach thermal efficiencies around 42.8% when using helium, whereas thermal performance might be
even better (46.7%), if a combined CO2 H2O cycle was set.
Power conversion systems based on Brayton cycles for fusion reactors
Tipo de Actividad
Artículos en revistasISSN
0920-3796Palabras Clave
.Brayton cycle ORC Power conversion systems