Mostrar el registro sencillo del ítem
Diseño de una instalación solar fotovoltaica para el autoconsumo de electricidad en una planta de galvanizado en España
dc.contributor.advisor | Alonso Alonso, Consolación | es-ES |
dc.contributor.author | Benavente Martínez, Jaime | es-ES |
dc.contributor.other | Universidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI) | es_ES |
dc.date.accessioned | 2021-09-15T11:16:30Z | |
dc.date.available | 2021-09-15T11:16:30Z | |
dc.date.issued | 2022 | es_ES |
dc.identifier.uri | http://hdl.handle.net/11531/61389 | |
dc.description | Grado en Ingeniería en Tecnologías Industriales | es_ES |
dc.description.abstract | El proyecto que se va a desarrollar consiste en el diseño de una instalación fotovoltaica de autoconsumo sobre estructuras pertenecientes a una planta de galvanizado en caliente localizada en la región de Casatejada, Cáceres. Con la finalidad de fomentar el desarrollo del autoconsumo por parte de los consumidores se publicó el Real Decreto 244/2019, 5 de abril, por el que se regulan las condiciones administrativas, técnicas y económicas del autoconsumo de energía eléctrica. Entre los beneficios asociados al autoconsumo destaca la reducción en la emisión de gases de efecto invernadero, y el fomento de la actividad económica y el empleo. De acuerdo a este Real Decreto, este proyecto se acoge al autoconsumo con compensación de excedentes. Esta modalidad de autoconsumo consiste en una instalación que genera energía para ser consumida directamente por el usuario y la que no se consuma se podrá verter a la red como energía excedentaria negociando un contrato entre el consumidor y la compañía eléctrica. Para acometer este proyecto, se evaluarán tres ámbitos fundamentales, el técnico, el económico y el medioambiental: En el aspecto Técnico: Se evaluarán los recursos solares de la localidad así como la superficie disponible. A continuación se seleccionarán los dispositivos a implementar en la instalación con sus correspondientes calculos. Se realizará el dimensionamiento mediante dos métodos distintos, analítico y computacional. En el aspecto Económico: Se analizará la posibilidad de subvencionar la planta. Además, se estudiará el contexto actual y el presupuesto de la instalación diseñada, se realizará un balance económico en su vida útil. Del anterior se extraerán indicadores económicos tales como el VAN, TIR y PayBack para conocer la rentabilidad del proyecto. En el aspecto medioambiental, se comprobará la reducción en emisiones de gases de efecto invernadero así como las metas cumplidas en los objetivos de desarrollo sostenible de la ONU. | es-ES |
dc.description.abstract | The project to be developed consists of the design of a photovoltaic installation for self-consumption on structures belonging to a hot-dip galvanizing plant located in the region of Casatejada, Cáceres. In order to encourage the development of self-consumption by consumers, the Royal Decree 244/2019, April 5, was published, which regulates the administrative, technical and economic conditions for the self-consumption of electricity. Among the benefits associated with self-consumption are the reduction of greenhouse gas emissions and the promotion of economic activity and employment. In accordance with this Royal Decree, this project is eligible for self-consumption with surplus compensation. This type of self-consumption consists of an installation that generates energy to be consumed directly by the user and that which is not consumed can be fed into the grid as surplus energy by negotiating a contract between the consumer and the electricity company. To undertake this project, three fundamental areas will be evaluated: technical, economic and environmental: In the technical aspect: The solar resources of the locality will be evaluated as well as the available surface. Then the devices to be implemented in the installation will be selected with their corresponding calculations. The sizing will be carried out using two different methods, analytical and computational. In the economic aspect: The possibility of subsidizing the plant will be analyzed. In addition, the current context and the budget of the designed installation will be studied, and an economic balance will be carried out during its useful life. From the previous one, economic indicators such as NPV, IRR and PayBack will be extracted to know the profitability of the project. In the environmental aspect, the reduction in greenhouse gas emissions will be verified, as well as the goals fulfilled in the UN sustainable development objectives. | en-GB |
dc.format.mimetype | application/pdf | es_ES |
dc.language.iso | es-ES | es_ES |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 United States | es_ES |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/us/ | es_ES |
dc.subject | 33 Ciencias tecnológicas | es_ES |
dc.subject | 3322 Tecnología energética | es_ES |
dc.subject | 332202 Generación de energía | es_ES |
dc.subject.other | KTI-electricidad (GITI-E) | es_ES |
dc.title | Diseño de una instalación solar fotovoltaica para el autoconsumo de electricidad en una planta de galvanizado en España | es_ES |
dc.type | info:eu-repo/semantics/bachelorThesis | es_ES |
dc.rights.accessRights | info:eu-repo/semantics/closedAccess | es_ES |
dc.keywords | DISEÑO DE UNA INSTALACIÓN FOTOVOLTAICA PARA EL AUTOCONSUMO DE ELECTRICIDAD EN UNA PLANTA DE GALVANIZADO EN ESPAÑA. | es-ES |
dc.keywords | DESIGN OF A PHOTOVOLTAIC INSTALLATION FOR SELF- CONSUMPTION OF ELECTRICITY IN A GALVANIZING PLANT IN SPAIN. | en-GB |