Grado en Ingeniería de Tecnologías de Telecomunicación: Recent submissions

Now showing items 461-480 of 856

    • Alemán (A1)/Alemán I/ Alemán II 

      Grossmann, Matthias; Sigerist, Anke (20/07/2021)

    • Seguridad y Normativa 

      Mouronte López, Mary Luz; Palacios Hielscher, Rafael; Santos Ortega, Francisco Javier (20/07/2021)

    • Algorítmica 

      Fernández-Pacheco Sánchez-Migallón, Atilano Ramiro; Puente Águeda, Cristina (19/07/2021)

    • Programación Orientada a Objetos 

      Contreras Bárcena, David; Gómez Lamela, Agustín Fernando (19/07/2021)

    • Integración de Redes 

      Contreras Bárcena, David; Martínez Perea, Rogelio (19/07/2021)

    • Estadística I 

      Caro Carretero, Raquel; Ercoreca Llano, Ainhoa; Maté Jiménez, Carlos (19/07/2021)

    • Cristianismo y Ética Social (GITT) 

      Agudelo Villarrubia, Raquel; Caamaño López, José Manuel; García Mourelo, Santiago; López Hortelano, Eduardo; Tatay Nieto, Jaime (17/07/2021)

    • Teoría de la Comunicación 

      Espejo Portero, Nicolás; López López, Gregorio; López López, Gregorio Ignacio; Matanza Domingo, Javier; Pérez Gandía, María del Carmen; Real Valdés, Santiago Isidro; Rodríguez Pecharromán, Ramón (17/07/2021)

    • Sistemas Digitales II 

      Muñoz Frías, José Daniel; Olmos González, Pedro Celestino; Padierna Díaz, Álvaro; Rodríguez Pecharromán, Ramón; Spahr, Julian; Zabalegui Sanz, Fermín (17/07/2021)

    • Sistemas Digitales I 

      Muñoz Frías, José Daniel; Padierna Díaz, Álvaro; Rodríguez Pecharromán, Ramón; Spahr, Julian; Zabalegui Sanz, Fermín (17/07/2021)

    • Procesamiento Digital de Señales 

      Bonilla Manrique, Oscar Elías; García de la Cueva, Carlos; Matanza Domingo, Javier; Rodrigues de Carvalho Carvalho, Camila; Rodríguez Pecharromán, Ramón (17/07/2021)

    • Microprocesadores 

      Bengochea Guevara, José María; Espinosa Bustillo, Miguel Ángel; Martín Martínez, Francisco María; Muñoz Frías, José Daniel; Rodríguez Pecharromán, Ramón (17/07/2021)

    • Electrónica 

      Espinosa Bustillo, Miguel Ángel; Giannetti, Romano; Maroto Carro, Juan Carlos; Muñoz Hernández, Alfonso; Rodríguez Marrero, José Luis; Rodríguez Pecharromán, Ramón (17/07/2021)

    • Utilizing jackknife and bootstrap to understand tensile stress to failure of an epoxy resin 

      Caro Carretero, Raquel; Carnicero López, Alberto; Jiménez Octavio, Jesús Ramón; Cousineau, Denis (2024-12-31)
      A study was conducted on the tensile stress of an epoxy resin (Resoltech® 10501056). This was done by gathering a sample of 39 tensile strength data under consistent levels of stress. The tensile stress resistance is often ...

    • The mental diet: choosing beliefs to improve wellbeing 

      Lumbreras Sancho, Sara (2024-07-01)
      Acknowledging the established link between beliefs and wellbeing, this paper explores the concept of voluntary belief acquisition and modification as a conscious and impactful process. This is contrasted with passive belief ...

    • Analysis of different flexible technologies in the Spain NECP for 2030 

      Ramos Galán, Andrés; Huclin, Sébastien; Chaves Ávila, José Pablo (2023-12-31)
      This paper proposes three dimensions relevant to the flexibility assessment: power gradient (i.e., ramps), power during critical hours, and energy available at different timescales. A two-phase procedure analyzes an electric ...

    • Characterization of the resistance to abrasive chemical agents of test specimens of thermoplastic elastomeric polyurethane composite materials produced by additive manufacturing 

      Paz Jiménez, Eva; Jiménez Calzado, Mariano; Romero Cuadrado, Luis; Espinosa Escudero, Mª del Mar; Domínguez Somonte, Manuel (2021-08-20)
      Currently the development of additive manufacturing and the emerging of new materials allows to manufacturing process obtaining functional models with properties and geometries adapted to each particular case with low ...

    • A modelica dynamic model of a supercritical CO2 energy conversion system for EU-DEMO 

      Ferrero, Simone; Batet, Lluis; Linares Hurtado, José Ignacio; Arenas Pinilla, Eva María; Cantizano González, Alexis; Savoldi, Laura (2021-12-01)
      Nuclear fusion technology is one of the main valuable candidates for providing a trustable base load in low-carbon future energy scenarios, thanks to its power density, low emissions and flexibility, together with innovative ...

    • Sustainable processes in aluminium, magnesium, and titanium alloys applied to the transport sector: a review 

      Blanco Gómez, David; Rubio Alvir, Eva María; Lorente Pedreille, Raquel María; Sáenz Nuño, María Ana (2022-01-01)
      The reduction of consumption and pollutant emissions is a top priority for the transport sector. One working line is the substitution of conventional structural materials with lightweight materials such as metallic alloys ...

    • Learning more with the same effort: how randomization improves the robustness of a robotic deep reinforcement learning agent 

      Güitta López, Lucía; Boal Martín-Larrauri, Jaime; López López, Álvaro Jesús (2023-06-01)
      The industrial application of Deep Reinforcement Learning (DRL) is frequently slowed down due to an inability to generate the experience required to train the models. Collecting data often involves considerable time and ...