Show simple item record

dc.contributor.advisorGonzález Hierro, Francisco
dc.contributor.authorRodicio Crespo, José Manuel
dc.contributor.otherUniversidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI)es_ES
dc.date.accessioned2017-03-13T11:34:00Z
dc.date.available2017-03-13T11:34:00Z
dc.date.issued2016
dc.identifier.urihttp://hdl.handle.net/11531/17438
dc.descriptionMáster Universitario en Ingeniería Industriales_ES
dc.description.abstractEn este proyecto se pretenden explotar las posibilidades de una nueva tecnología de almacenamiento térmico en hormigón en relación a la energía solar de baja temperatura. Para ello se pretende diseñar un equipo modular que pueda ser producido en fábrica de forma estandarizada y pueda dar servicio al mayor número de clientes posible. Para el estudio resulta esencial comprobar la utilidad real no solo en términos de viabilidad técnica, sino también económica, por lo que el equipo deberá ser rentable para sus futuros compradores teniendo en cuenta las demás opciones que ofrece el mercado. En la actualidad las energías renovables en general y la solar en particular, tienen como problema fundamental la gestionabilidad de la producción para poder satisfacer la demanda. Para ello resultan fundamentales los sistemas de acumulación de energía, en este caso los térmicos. Existen muchos sistemas de almacenamiento térmico. Sin embargo, su baja capacidad de almacenamiento y su precio provoca que sean necesarios grandes sistemas muy voluminosos y caros. Para el almacenamiento a alta temperatura encontramos como tecnología más usada las sales fundidas, mientras que para baja temperatura el mejor sistema resulta el almacenamiento de agua caliente.es_ES
dc.description.abstractThis project is intended to exploit the possibilities of a new concrete technology of thermal storage in relation to low temperature solar energy. With this aim it is going to be done a design of a modular equipment that can be produced at factory in a standardized way and that will cover a range of customers as wide as possible. For the study it is essential to check the actual utility of the technology not only in terms of technical feasibility, but also economically, so the device designed must be profitable for its future buyers considering the rest of products offered in the market. Nowadays, renewable energies in general and solar in particular have a main problem with the management of energy generation in order to meet demand. Therefore, energy storage systems emerge as key. In this case thermal storage systems are key. There are many thermal storage systems. However, their low storage capacity and high prices made them bulky and expensive. Today, molten salts storage is the most commonly used technology for high temperatures, whereas for low temperatures the best system is the hot water storage.es_ES
dc.format.mimetypeapplication/pdfes_ES
dc.language.isoeses_ES
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United States*
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/*
dc.subject33 Ciencias tecnológicases_ES
dc.subject3306 Ingeniería y tecnología eléctricaes_ES
dc.subject330606 Fabricación de equipo eléctricoes_ES
dc.subject3322 Tecnología energéticaes_ES
dc.subject332205 Fuentes no convencionales de energíaes_ES
dc.titleDiseño de equipo para la producción de energía térmica por medio de captadores solares usando almacenamiento en hormigónes_ES
dc.typeinfo:eu-repo/semantics/masterThesises_ES
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES


Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 United States
Except where otherwise noted, this item's license is described as Attribution-NonCommercial-NoDerivs 3.0 United States