Climatización de un Centro Comercial en Jaén
Abstract
Este proyecto consiste en la realización de la instalación de climatización de un centro comercial en la ciudad de Jaén (España). Partiendo de las condiciones climatológicas y las características constructivas del edificio se diseña una solución para climatizar los espacios del edificio que así lo requieren.
Se decide emplear un sistema de generación aire-agua mediante bombas de calor con transporte utilizando tuberías de agua y fancoils como unidades terminales para los locales menores de 1000 metros cuadrados Para los locales mayores de 1000 metros cuadrados y la zona común (mall) se decide utilizar un sistema de generación aire-aire mediante equipos Roof Top con transporte de aire mediante conductos y toberas de impulsión y rejillas de retorno como unidades terminales
La metodología empleada consiste en el cálculo de cargas térmicas tanto in régimen de invierno como en régimen de verano en las condiciones más desfavorables de ambos. A continuación se calcula el caudal de fluido de transporte necesario y se diseña el trazado de tuberías y conductos. Por último se calcula la perdida de carga del sistema y se eligen equipos capaces de vencer dicha perdida de carga y capaces de aportar el calor suficiente al fluido de transporte.
El proyecto también incluye un presupuesto de la instalación, los planos asociados a esta y los pliegos de condiciones necesarios para la correcta realización de la misma. This project consists of the realization of the air conditioning installation of a shopping center in the city of Jaen (Spain). Based on the weather conditions and the constructive characteristics of the building, a solution was designed to air-condition the spaces of the building that required it.
It was decided to use an air-water generation system by means of heat pumps with transport using water pipes and fan coil units as terminal units for the premises smaller than 1000 square metres. For the premises larger than 1000 square metres and the common area (mall), it was decided to use an air-air generation system using Roof Top units with air transport using supply ducts and nozzles and return grilles as terminal units
The methodology used consists of calculating thermal loads both in winter and in summer under the most unfavourable conditions of both. Then, the flow of transport fluid required is calculated and the layout of pipes and ducts is designed. Finally, the pressure drop of the system is calculated and equipment is chosen that is capable of overcoming this pressure drop and that is able to provide sufficient heat to the transport fluid.
The project also includes a budget for the installation, the associated drawings and the specifications necessary for the correct performance of the installation.
Trabajo Fin de Máster
Climatización de un Centro Comercial en JaénTitulación / Programa
Máster Universitario en Ingeniería IndustrialMaterias/ UNESCO
33 Ciencias tecnológicas3313 Tecnología e ingeniería mecánica
331326 Equipo de refrigeración
3305 Tecnología de la construcción
330517 Edificios industriales y comerciales
Palabras Clave
Climatización Bomba de calor Roof top Tuberías Conductos Fancoil Toberas Rejillas Bomba de impulsion Cargas térmicasAir conditioning Heat pump Roof top Pipes Conduits Fancoil Nozzles Grids Booster pump Thermal loads