Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11531/100560
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.authorEsteban Temprano, Ángelaes-ES
dc.contributor.authorde Castro Asensio, Inéses-ES
dc.contributor.authorDelgado San Martín, Lauraes-ES
dc.contributor.authorSáenz Nuño, María Anaes-ES
dc.contributor.authorFernández Vicente, Teresa Esperanzaes-ES
dc.contributor.authorPeña Rubio, Lourdeses-ES
dc.contributor.authorSáez Serrano, Aliciaes-ES
dc.contributor.authorSánchez Blaya, Carmenes-ES
dc.date.accessioned2025-07-10T14:22:11Z-
dc.date.available2025-07-10T14:22:11Z-
dc.date.issued2025-05-01es_ES
dc.identifier.issn2665-9174es_ES
dc.identifier.urihttps:doi.org10.1016j.measen.2024.101649es_ES
dc.identifier.urihttp://hdl.handle.net/11531/100560-
dc.descriptionArtículos en revistases_ES
dc.description.abstractes-ES
dc.description.abstractThe Spanish National Metrology Center (CEM) is dedicated to advance the understanding of the essential role of measurements in the healthcare sector. CEM has created a laboratory in healthcare metrology to ensure the accuracy of measurements in medical equipment, including computed tomography (CT). The primary objective of this project is to design a system considered as a standard, called Phantometer, which allows the traceability of dimensional measurements obtained from diagnostic imaging to the International System of Units (SI). For this purpose, the Phantometer has been graphically designed and numerical simulations have been performed to examine its response to environmental conditions and to evaluate the relative contributions of uncertainty to the dimensional measurements, primarily due to thermal and mechanical forces and torsion sources. Subsequently, the standard undergoes metrological characterization in dimensional terms, and the results are disseminated to the research community.en-GB
dc.language.isoen-GBes_ES
dc.sourceRevista: Measurement: Sensors, Periodo: 1, Volumen: online, Número: Supplement, Página inicial: 101649-1, Página final: 101649-5es_ES
dc.subject.otherInstituto de Investigación Tecnológica (IIT)es_ES
dc.titleEmerging innovations in health metrology for diagnostic imaginges_ES
dc.typeinfo:eu-repo/semantics/articlees_ES
dc.description.versioninfo:eu-repo/semantics/publishedVersiones_ES
dc.rights.holderes_ES
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES
dc.keywordses-ES
dc.keywordsCEM; Diagnostic imaging; Health; Phantometer; Standard; Traceability; Uncertaintyen-GB
Aparece en las colecciones: Artículos

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
IIT-25-009R3,5 MBUnknownVisualizar/Abrir
IIT-25-009R_preview3,02 kBUnknownVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.