Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/11531/105309| Título : | Miniaturized top-metalized 3D-printed rectangular Dielectric Resonator Antenna |
| Autor : | Herraiz Martínez, Francisco Javier Pérez Escribano, Mario Sofokleous, Paraskevas Padilla de la Torre, Pablo Márquez Segura, Enrique |
| Fecha de publicación : | 19-jul-2025 |
| Editorial : | IEEE Antennas and Propagation Society; Institute of Electrical and Electronics Engineers (Florencia, Italia) |
| Resumen : | This paper introduces a novel top-metalized Dielectric Resonator Antenna (DRA). The inclusion of top metallization induces a modification in the boundary conditions, resulting in a frequency reduction in the fundamental mode of the DRA. A prototype is designed for the 2.45-GHz WiFi band with a –10-dB bandwidth from 2.40 to 2.51 GHz. The radiation maxima occur in the top and bottom directions, with a gain of 1.81dBi at 2.45 GHz. The proposed DRA is specifically designed for manufacturing using commercially available materials and additive manufacturing techniques. |
| Descripción : | Capítulos en libros |
| URI : | http://hdl.handle.net/11531/105309 |
| Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
| Fichero | Tamaño | Formato | |
|---|---|---|---|
| IIT-24-146C.pdf | 363,48 kB | Adobe PDF | Visualizar/Abrir Request a copy |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.