Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/11531/4848
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.author | Barbosa, Ana.Q. | es-ES |
dc.contributor.author | Da Silva, Lucas.F.M. | es-ES |
dc.contributor.author | Abenojar Buendía, Juana | es-ES |
dc.contributor.author | del Real Romero, Juan Carlos | es-ES |
dc.contributor.author | Paiva, Rosa M.M. | es-ES |
dc.contributor.author | Öchsner, Andreas | es-ES |
dc.date.accessioned | 2016-01-15T11:14:53Z | - |
dc.date.available | 2016-01-15T11:14:53Z | - |
dc.date.issued | 2015-03-20 | es_ES |
dc.identifier.issn | 0040-6031 | es_ES |
dc.identifier.uri | https:doi.org10.1016j.tca.2015.01.025 | es_ES |
dc.description | Artículos en revistas | es_ES |
dc.description.abstract | es-ES | |
dc.description.abstract | Epoxy resins are the most common structural adhesives due to their good mechanical, thermal and chemical properties. However, the structure of these thermoset polymers, due to the high crosslinking, also causes brittleness, with a low resistance to the initiation of cracks and their propagation. The inclusion of particles (nano or micro) is a common method to improve the mechanical properties such as toughness of structural adhesives. In the present study, natural micro particles of cork were used to increase the toughness of a brittle epoxy adhesive. The main objective of this research was to investigate the effect of the amount of cork particles in the cure reaction of a brittle epoxy, knowing that the amount present influences the mechanical properties. This study was developed using specimens with 0.5, 1, 2 and 5 (volume) of cork and without cork, as reinforcement material of a brittle resin. In general the cork particles do not influence the curing process, although they slightly change the curing mechanism. Also, cork particles decrease the glass transition temperature (Tg) and have a plasticizer effect in the epoxy resin. | en-GB |
dc.format.mimetype | application/pdf | es_ES |
dc.language.iso | en-GB | es_ES |
dc.rights | es_ES | |
dc.rights.uri | es_ES | |
dc.source | Revista: Thermochimica Acta, Periodo: 1, Volumen: online, Número: , Página inicial: 52, Página final: 60 | es_ES |
dc.subject.other | Instituto de Investigación Tecnológica (IIT) | es_ES |
dc.title | Kinetic analysis and characterization of an epoxycork adhesive | es_ES |
dc.type | info:eu-repo/semantics/article | es_ES |
dc.description.version | info:eu-repo/semantics/publishedVersion | es_ES |
dc.rights.accessRights | info:eu-repo/semantics/restrictedAccess | es_ES |
dc.keywords | es-ES | |
dc.keywords | Thermosetting resin; Curing process; Kinetics; Cork micro-particles; Differential scanning calorimetry | en-GB |
Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
IIT-15-023A.pdf | 1,07 MB | Adobe PDF | Visualizar/Abrir Request a copy |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.