Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/11531/65170
Título : | 3D printing of a graphene-modified photopolymer using stereolithography for biomedical applications: a study of the polymerization reaction |
Autor : | López de Armentia Hernández, Sara Fernández Villamarín, Silvia Ballesteros Iglesias, María Yolanda del Real Romero, Juan Carlos Dunne, Nicholas Paz Jiménez, Eva |
Fecha de publicación : | 1-mar-2022 |
Resumen : | Additive manufacturing is gaining importance thanks to its multiple advantages. Stereolithography (SLA) shows the highest accuracy and the lowest anisotropy, which has facilitated the emergence of new applications as dentistry or tissue engineering. However, the availability of commercial photopolymers is still limited, and there is an increasing interest in developing resins with properties adapted for these new applications. The addition of graphene-based nanomaterials (GBN) may provide interesting advantages, such as improved mechanical properties and bioactivity. However, there is a lack of knowledge regarding the effect of GBNs on the polymerization reaction. A photopolymerizable acrylic resin has been used, and the effect of the addition of 0.1wt of graphene (G); graphene oxide (GO) and graphite nanoplatelets (GoxNP) on printability and polymerization have been investigated. It was observed that the effect depended on GBN type, functionalization and structure (e.g., number of layers, size, and morphology) due to differences in the extent of dispersion and light absorbance.The obtained results showed that GO and GoxNP did not significantly affect the printability and quality of the final structure, whilst the application of G exhibited a negative effect in terms of printability due to a reduction in the polymerization degree.GO and GoxNP-loaded resins showed a great potential to be used for manufacturing structures by SLA. |
Descripción : | Artículos en revistas |
URI : | https:doi.org10.18063ijb.v8i1.503 |
ISSN : | 2424-7723 |
Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
IIT-22-005R.pdf | 2,95 MB | Adobe PDF | ![]() Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.