Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/11531/76720
Título : | High speed machining of aisi 1050 steel : Modelling and experimental |
Autor : | Soldani, Xavier Molinari, Alain Budak, Erhan Moufki, Abdelhadi Özlü, Emre |
Fecha de publicación : | 1-abr-2008 |
Resumen : | . An analytical approach is used to model orthogonal cutting process. The material characteristics such as strain rate sensitivity, strain hardening and thermal softening are considered. The chip formation is supposed to occur mainly by shearing within a thin band called primary shear zone. The analysis is limited to stationary flow and the material flow within the primary shear zone is modelled by using a onedimensional approach. Thermomechanical coupling and inertia effects are accounted for. At the tool-chip interface, a temperature dependent friction law is introduced to take account of the extreme conditions of pressure, velocities and temperature encountered during machining. Comparisons between model predictions and experimental results are performed for different cutting conditions. |
Descripción : | Artículos en revistas |
URI : | 10.1007/s12289-008-0107-z http://hdl.handle.net/11531/76720 |
ISSN : | 1960-6206 |
Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
Fichero | Tamaño | Formato | |
---|---|---|---|
2022122295742728_High_Speed_Machining_of_AISI_1050_Steel_Modelling_.pdf | 129,54 kB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.