Por favor, use este identificador para citar o enlazar este ítem:
http://hdl.handle.net/11531/8061
Registro completo de metadatos
Campo DC | Valor | Lengua/Idioma |
---|---|---|
dc.contributor.author | Romero, Luis | es-ES |
dc.contributor.author | Jiménez Calzado, Mariano | es-ES |
dc.contributor.author | Espinosa, María del Mar | es-ES |
dc.contributor.author | Domínguez Somonte, Manuel | es-ES |
dc.date.accessioned | 2016-05-27T12:22:56Z | - |
dc.date.available | 2016-05-27T12:22:56Z | - |
dc.date.issued | 01/12/2015 | es_ES |
dc.identifier.issn | 1932-6203 | es_ES |
dc.identifier.uri | http://hdl.handle.net/11531/8061 | - |
dc.description | Artículos en revistas | es_ES |
dc.description.abstract | This study proposes the replacement of all the physical devices used in the manufacturingof conventional prostheses through the use of digital tools, such as 3D scanners, CADdesign software, 3D implants files, rapid prototyping machines or reverse engineering soft-ware, in order to develop laboratory work models from which to finish coatings for dentalprostheses. Different types of dental prosthetic structures are used, which were adjusted bya non-rotatory threaded fixing system. | es-ES |
dc.description.abstract | This study proposes the replacement of all the physical devices used in the manufacturingof conventional prostheses through the use of digital tools, such as 3D scanners, CADdesign software, 3D implants files, rapid prototyping machines or reverse engineering soft-ware, in order to develop laboratory work models from which to finish coatings for dentalprostheses. Different types of dental prosthetic structures are used, which were adjusted bya non-rotatory threaded fixing system. | en-GB |
dc.format.mimetype | application/pdf | es_ES |
dc.language.iso | en-GB | es_ES |
dc.rights | Creative Commons Reconocimiento-NoComercial-SinObraDerivada España | es_ES |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ | es_ES |
dc.source | Revista: PLoS One, Periodo: 1, Volumen: DOI:10.1371, Número: DOI:10.1371, Página inicial: 1, Página final: 13 | es_ES |
dc.title | New Design for Rapid Prototyping of DigitalMaster Casts for Multiple Dental Implant Restorations | es_ES |
dc.type | info:eu-repo/semantics/article | es_ES |
dc.description.version | info:eu-repo/semantics/publishedVersion | es_ES |
dc.rights.holder | es_ES | |
dc.rights.accessRights | info:eu-repo/semantics/openAccess | es_ES |
dc.keywords | Diseño, Prototipado Rápido, Modelo maestro, implantes. | es-ES |
dc.keywords | Design, Rapid Prototyping, Digital Master Casts, Multiple Dental Implant Restorations | en-GB |
Aparece en las colecciones: | Artículos |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
New Design for Rapid Prototyping of DigitalMaster Casts for Multiple Dental Implant Restorations.pdf | 3,69 MB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.