Por favor, use este identificador para citar o enlazar este ítem: http://hdl.handle.net/11531/93514
Registro completo de metadatos
Campo DC Valor Lengua/Idioma
dc.contributor.advisorCepeda Fernández, Fernandoes-ES
dc.contributor.authorCano Algarra, Ignacioes-ES
dc.contributor.otherUniversidad Pontificia Comillas, Escuela Técnica Superior de Ingeniería (ICAI)es_ES
dc.date.accessioned2024-09-06T14:47:39Z-
dc.date.available2024-09-06T14:47:39Z-
dc.date.issued2025es_ES
dc.identifier.urihttp://hdl.handle.net/11531/93514es_ES
dc.descriptionMáster Universitario en Ingeniería Industriales_ES
dc.description.abstractEste proyecto de fin de máster aborda el diseño y cálculo de las instalaciones de climatización y ventilación para un hospital ubicado en Granada, con el objetivo de garantizar condiciones ambientales óptimas en su interior, cumpliendo con la normativa vigente y promoviendo la eficiencia energética. El trabajo incluye el cálculo de cargas térmicas para verano e invierno, la selección de equipos (fancoils, climatizadores, calderas y enfriadoras), el dimensionamiento de redes hidráulicas y de conductos de aire, y la elaboración de planos y presupuestos. Los resultados muestran una capacidad total de refrigeración de 943,23 kW y de calefacción de 582,09 kW, con caudales de agua fría y caliente de 162.205,88 L/h y 50.050,93 L/h, respectivamente. Además, el proyecto se alinea con varios Objetivos de Desarrollo Sostenible (ODS), contribuyendo a la salud, el bienestar y la sostenibilidad ambientales-ES
dc.description.abstractThis master's thesis addresses the design and calculation of the HVAC installations for a hospital located in Granada, with the objective of ensuring optimal indoor environmental conditions in compliance with current regulations and promoting energy efficiency. The work includes the calculation of thermal loads for summer and winter, selection of equipment (fan coils, air handling units, boilers and chillers), sizing of hydraulic and air duct networks, and the preparation of plans and budgets. The results show a total cooling capacity of 943,23 kW and a heating capacity of 582.09 kW, with chilled and hot water flow rates of 162.205,88 L/h and 50.050,93 L/h, respectively. Additionally, the project aligns with several Sustainable Development Goals (SDGs), contributing to health, well-being and environmental sustainability.en-GB
dc.format.mimetypeapplication/pdfes_ES
dc.language.isoes-ESes_ES
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 United Stateses_ES
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/us/es_ES
dc.subject.otherH62-mecanica (MII-M)es_ES
dc.titleCLIMATIZACIÓN DE UN HOSPITAL EN GRANADAes_ES
dc.typeinfo:eu-repo/semantics/masterThesises_ES
dc.rights.accessRightsinfo:eu-repo/semantics/openAccesses_ES
dc.keywordsClimatización hospitalaria, eficiencia energética, cargas térmicas, ODS, ventilación.es-ES
dc.keywordsHospital HVAC, energy efficiency, thermal loads, SDGs, ventilationen-GB
Aparece en las colecciones: H62-Trabajos Fin de Máster

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
TFM - Cano Algarra Ignacio.pdfTrabajo Fin de Máster13,62 MBAdobe PDFVisualizar/Abrir
Anexo I.pdfAutorización143,57 kBAdobe PDFVisualizar/Abrir     Request a copy


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.