Miniaturized top-metalized 3D-printed rectangular Dielectric Resonator Antenna

Abstract

This paper introduces a novel top-metalized Dielectric Resonator Antenna (DRA). The inclusion of top metallization induces a modification in the boundary conditions, resulting in a frequency reduction in the fundamental mode of the DRA. A prototype is designed for the 2.45-GHz WiFi band with a –10-dB bandwidth from 2.40 to 2.51 GHz. The radiation maxima occur in the top and bottom directions, with a gain of 1.81dBi at 2.45 GHz. The proposed DRA is specifically designed for manufacturing using commercially available materials and additive manufacturing techniques.

This paper introduces a novel top-metalized Dielectric Resonator Antenna (DRA). The inclusion of top metallization induces a modification in the boundary conditions, resulting in a frequency reduction in the fundamental mode of the DRA. A prototype is designed for the 2.45-GHz WiFi band with a –10-dB bandwidth from 2.40 to 2.51 GHz. The radiation maxima occur in the top and bottom directions, with a gain of 1.81dBi at 2.45 GHz. The proposed DRA is specifically designed for manufacturing using commercially available materials and additive manufacturing techniques.